Row of thirteen color-coded Fusion Pro metering tips, from clear and white through yellow, pink, orange, red, purple, teal, blue, green, brown, gray, and black

Dispensing accessory

Fusion Pro Metering Tips

$15

Color-coded metering tips that set the exact dilution on each Fusion Pro output, from glass cleaner to heavy degreaser. Lock in a tip and every bottle and bucket comes out the same.

  • Color-coded, so the setting is visible at a glance
  • Threaded tips fit the Fusion Pro product inlet
  • Tailor any output to your soil load and water pressure
Add to cart · $15 Request a volume quote

Secure checkout is handled by Shopify.

Your dilution, locked in

Fusion metering tips let you customize every output on the dispenser precisely. Each tip has a different orifice size. The bigger the opening, the more concentrate is drawn into the water stream, so swapping a tip changes the ratio. The dispenser then delivers at your specification every time.

Water pressure varies from building to building, so the same tip can produce slightly different ratios at different sites. The fix is simple. Start with the recommended color, run a volume test, and step up or down one tip until you hit the target. Write the final tip color on the cabinet door so the next technician doesn't have to guess.

Tip guide

Starting-point tips for Nature’s Wash concentrate

Recommended starting tips on the Fusion Pro (EWS-731G)
DutyStationMetering tipApprox. ratioTypical use
Glass1 GPM bottleLime100:1Mirrors, glass, stainless fixtures
All-Purpose1 GPM bottlePink43:1Tables, counters, desks, guest-facing surfaces
Heavy Duty (bottle)1 GPM bottleBlue13:1Equipment exteriors, restroom fixtures
Degreaser1 GPM bottleGray4:1Hood filters, fryers, grills, ovens
Floor4 GPM bucketGreen64:1Mop buckets and autoscrubbers
Heavy Duty (bucket)4 GPM bucketPurple15:1Heavy soil, kitchen floors, dock areas

Starting points from the product specification sheet. Your water pressure affects the final ratio, so lock in the tip that hits the target, confirm it with a volume test, and write the tip color on the cabinet door.

How to set a tip

  1. Shut off water to the dispenser and remove the product pickup line from the output you're changing.
  2. Thread the selected tip into the product inlet hand-tight.
  3. Reconnect, then dispense into a measured container and check the ratio: concentrate drawn vs. total solution.
  4. Adjust up or down one tip size if needed, and record the final color on the cabinet door.

Not sure which tips you need?

Tell us your target dilutions and site water pressure, and we will send the right tip set with your order.

Ask about tips See Fusion Pro